Publicaciones

Imagen subrayado titulo

En esta sección se presentan las publicaciones realizadas por los componentes del grupo en congresos internacionales y revistas científicas.

Publicaciones en Revistas Científicas


Año 2016

  • J. Aramburu, R. Antón, A. Rivas, J.C. Ramos, B. Sangro, J.I. Bilbao, "Numerical investigation of liver radioembolization via computational particle–hemodynamics: The role of the micro catheter distal direction and microsphere injection point and velocity", Journal of Biomechanics, Vol. 49 (15), 2016, pp. 3714-3721.
  • J. Aramburu, R. Antón, A. Rivas, J.C. Ramos, B. Sangro, J.I. Bilbao, "Computational assessment of the effects of the catheter type on particle–hemodynamics during liver radioembolization", Journal of Biomechanics, Vol. 49 (15), 2016, pp. 3705-3713.
  • S. Ruiz de Galarreta, R. Antón, A. Cazón, G.S. Larraona, E. Finol, "Anisotropic abdominal aortic aneurysm replicas with biaxial material characterization", Medical Engineering & Physics, Vol. 38, 2016, pp. 1505-1512.
  • J. Aramburu, R. Antón, A. Rivas, J.C. Ramos, B. Sangro, J.I. Bilbao, "Liver cancer arterial perfusion modelling and CFD boundary conditions methodology: a case study of the haemodynamics of a patient-specific hepatic artery in literature-based healthy and tumour-bearing liver scenarios", International Journal of Numerical Methods in Biomedical Engineering, Vol. 32 (11), 2016, e02764.
  • C. Martín-Gómez, M. Ibáñez-Puy, J. Bermejo-Busto, J.A. Sacristán Fernández, J.C. Ramos, A. Rivas, "Thermoelectric cooling heating unit prototype", Building Serv. Eng. Res. Technol., Vol. 37 (4), 2016, pp. 431-449.
  • L. Martín-Martín, J. Gastelurrutia, N. Nieto, J.C. Ramos, A. Rivas, I. Gil, "Modeling based on design of thermal management systems for vertical elevation applications powered by lithium-ion batteries", Applied Thermal Engineering, Vol. 102, 2016, pp. 1081-1094.
  • J. Aramburu, R. Antón, N. Bernal, A. Rivas, J.C. Ramos, B. Sangro, J.I. Bilbao, "A methodology for assessing local bifurcated blood vessel shape variations", Biomedical Physics & Enginering Express, Vol. 2 (1), 2016, 015001.

Año 2015

  • A. Cazón, J. González-Prada, E. García, G.S. Larraona, S. Ausejo, "Pilot study describing the design process of an oil sump for a competition vehicle by combining additive manufacturing and carbon fibre layers", Virtual and Physical Prototyping, Vol. 10 (3), 2015, pp. 1-14.
  • J. Aramburu, R. Antón, N. Bernal, A. Rivas, J.C. Ramos, B. Sangro, J.I. Bilbao, "Physiological outflow boundary conditions methodology for small arteries with multiple outlets: A patient-specific hepatic artery haemodynamics case study", Proc. of the Inst. of Mech. Eng. Part H- Journal of Engineering in Medicine, Vol. 229 (4), 2015, pp. 291-306.
  • M.A. Malumbres, M. Satrustegui, I. Elosegui, J.C. Ramos, M. Martínez-Iturralde, "Analysis of relevant aspects of thermal and hydraulic modeling of electric machines. Application in an open self-ventilated machine", Applied Thermal Engineering, Vol. 75, 2015, pp. 277-288.
  • R. Antón, C.Y. Chen, M.Y. Hung, E.A. Finol, K. Pekkan, "Experimental and computational investigation of the patient-specific abdominal aortic aneurysm pressure field", Computer Methods in Biomechanics and Biomedical Engineering, Vol. 18 (9), 2015, pp. 981-992.

Año 2014

  • A. Bengoechea, R. Antón, G. S. Larraona, J. C. Ramos, A. Rivas, "Influence of geometrical parameters in the downstream flow of a screen under fan-induced swirl conditions", Engineering Applications of Computational Fluid Mechanics, Vol. 8 (4), 2014, pp. 623-638.
  • N. Nieto, L. Díaz, J. Gastelurrutia, F. Blanco, J. C. Ramos, A. Rivas, "Novel thermal management system design methodology for power lithium-ion battery", Journal of Power Sources, Vol. 272, 2014, pp. 272-291.
  • A. Bengoechea, R. Antón, G.S. Larraona, A. Rivas, J.C. Ramos, Y. Masip, "PIV measurements and a CFD benchmark study of a screen under fan-induced swirl conditions", International Journal of Heat and Fluid Flow, Vol. 46, 2014, pp. 43-60.
  • M. Beiza, J.C. Ramos, A. Rivas, R. Antón, G.S. Larraona, J. Gastelurrutia, I. de Miguel, "Zonal thermal model of the ventilation of underground transformer substations: Development and parametric study", Applied Thermal Engineering, Vol. 62, 2014, pp. 215-228.
  • C.Y. Chen, R. Antón, M.-Y. Hung, P. Menon, E.A. Finol, K. Pekkan, "Effects of intraluminal thrombus on patient-specific abdominal aortic aneurysm hemodynamics via stereoscopic particle image velocity and computational fluid dynamics modeling", Journal of Biomechanical Engineering, Vol. 136, 2014, 03001.
  • E. Goikoetxea, X. Murgia, P. Serna-Grande, A. Valls-i-Soler, C. Rey-Santano, A. Rivas, R. Antón, F.J. Basterretxea, L. Minambres, E. Mendez, A. Lopez-Arraiza, J.L. Larrabe-Barrena, M.A. Gomez-Solaetxe, "In vitro surfactant and perfluorocarbon aerosol deposition in a neonatal physical model of the upper conducting airways", Plos One, Vol. 9 (9), 2014, e106835.

Año 2013

  • M. Satrústegui, M. Martínez-Iturralde, A. Rivas, J.C. Ramos, "Algebraic model for predicting the hydraulic behaviour of an open self-ventilated electrical machine", International Review on Modelling and Simulations (I.R.E.M.O.S), Vol. 6(5), 2013, pp. 1446-1451. 
  • E. Martínez-Galván, R. Antón, J.C. Ramos, R. Khodabandeh, "Effects of the spray cone angle in the spray cooling with R134a", Experimental Thermal and Fluid Sciences, Vol. 50, 2013, pp. 127-138.
  • E. Martínez-Galván, R. Antón, J.C. Ramos, R. Khodabandeh, "Influence of surface roughness on a spray cooling system with R134a. Part II: Film thickness measurements", Experimental Thermal and Fluid Sciences, Vol. 48, 2013, pp. 73-80.
  • E. Martínez-Galván, R. Antón, J.C. Ramos, R. Khodabandeh, "Influence of surface roughness on a spray cooling system with R134a. Part I: Heat transfer measurements", Experimental Thermal and Fluid Sciences, Vol. 46, 2013, pp. 183-190.
  • G.S. Larraona, A. Rivas, R. Antón, J. C. Ramos, I. Pastor, B. Moshfegh, "Computational parametric study of an impinging jet in a cross-flow configuration for electronics cooling applications", Applied Thermal Engineering, Vol. 52 (2), 2013, pp. 428-438.
  • A.M. Guzmán, M. P. Beiza, A.J. Díaz, P. F. Fischer, J.C. Ramos, "Flow and heat transfer characteristics in micro and mini communicating pressure driven channel flows by numerical simulations", International Journal of Heat and Mass Transfer, Vol 58, 2013, pp. 568-577.
  • J.C. Ramos, M. Beiza, J. Gastelurrutia, A. Rivas, R. Antón, G.S. Larraona, I. de Miguel, "Numerical modelling of the natural ventilation of underground transformer substations", Applied Thermal Engineering, Vol. 51, 2013, pp. 852-863.
  • N. Nieto, L. Díaz, J. Gastelurrutia, I. Alava, F. Blanco, J.C. Ramos, A. Rivas, "Thermal Modeling of Large Format Lithium-Ion Cells", Journal of Electrochemical Society, Vol. 160 (2), 2013, pp. A212-A217.

Año 2012

  • R. Antón, A. Bengoechea, A. Rivas, J.C. Ramos, G.S. Larraona, "Performance of axial fans in close proximity to electromagnetic compatibility screens", Journal of Electronic Packaging, Vol. 134, 2012, 011004.
  • M. Altimira, A. Rivas, J. C. Ramos, R. Antón, "On the disintegration of fan-shaped liquid sheets", Atomization and Sprays, Vol. 22 (9), 2012, pp. 733-755.
  • Y. Masip, A. Rivas, G. S. Larraona, R. Antón, J. C. Ramos, B. Moshfegh, "Experimental study of the turbulent flow around a single wall-mounted cube exposed to a cross-flow and an impinging jet", International Journal of Heat and Fluid Flow, Vol. 38, 2012, pp. 50-71.

Año 2011

  • J. Gastelurrutia, J.C. Ramos,  A. Rivas, G.S. Larraona, J. Izagirre, L. del Río, "Zonal thermal model of distribution transformers", Applied Thermal Engineering, Vol. 31, 2011, pp. 4024-4035.
  • J. Gastelurrutia, J.C. Ramos, G.S. Larraona, A. Rivas, J. Izagirre, L. del Río, "Numerical modelling of natural convection of oil inside distribution transformers", Applied Thermal Engineering, Vol. 31, 2011, pp. 493-505.
  • R. Antón, J. Gastelurrutia, J.C. Ramos, A. Rivas, G.S. Larraona, "Learning through a Multiple Approach Competing Practical Exercise -MACPE: a case study with a teacher’s and a student’s assessment", International Journal of Engineering Education, Vol. 27 (4), 2011, pp. 805-812.
  • E. Martínez, J.C. Ramos, R. Antón, R. Khodabandeh, "Film thickness and heat transfer measurements ina spray cooling system with R134a", Journal of Electronic Packaging, Vol. 133 (1), 2011, 011002. doi:10.1115/1.4001857

Año 2010

  • M. Altimira, A. Rivas, J.C. Ramos, R. Antón, "Linear Spatial Instability Analysis of a viscous liquid sheet flowing in a viscous gas medium", Physics of Fluids, Vol. 22 (7), 2010, 074103. doi:10.1063/1.3460348

Año 2009

  • M. Altimira, A. Rivas, G.S. Larraona, R. Antón, J. C. Ramos, "Characterization of fan spray atomizers through Computational Fluid Dynamics techniques". International Journal of Heat and Fluid Flow, Vol. 30, 2009, pp. 339-355.
  • R. Antón, H. Jonsson, J.C. Ramos, A. Rivas, T. Gómez-Acebo, "Refrigerating cycle simulator: System modeling, educational implementation and assessment", International Journal of Engineering Education, Vol. 24 (2), 2009, pp. 324-332.
  • R. Antón, H. Jonsson, B. Moshfegh, “Detailed CFD modelling of EMC screens for radio base stations: A parametric study”, IEEE Transactions on Components and Packaging Technologies, Vol. 32 (1), 2009, pp. 145-155.
  • M. Faraji, H. El Qarnia, J.C. Ramos, "Thermal control of protruding electronic components with PCM: a parametric study", Numerical Heat Transfer, Part A: Applications, Vol. 56 (7), 2009, pp. 579-603.

Año 2008

  • G.S. Larraona, A. Rivas, J.C. Ramos, “Computational Modeling and Simulation of a Single-jet Water Meter” Journal of Fluids Engineering Transactions of the ASME, Vol. 130, 2008, 051102.
  • A. Rivas, I. Irizar, E. Ayesa, "Model-Based Optimisation of Wastewater Treatment Plants Design", Environmental Modelling and Software, Vol. 23, 2008, pp. 435-450.

Año 2007

Año 2006

  • A. Rivas, T. Gómez-Acebo, J. C. Ramos, "The application of spreadsheets to the analysis and optimisation of systems and processes in the teaching of hydraulic and thermal engineering", Computer Applications in Engineering Education, Vol. 14, 2006, pp. 256-268.

Año 2005

  • J.C. Ramos, A. Rivas, J. Biera, G. Sacramento, J. A. Sala, "Development of a thermal model for automotive twin-tube shock absorbers", Applied Thermal Engineering, Vol. 25, 2005, pp. 1836-1853.
  • N. Gil-Negrete, A. Rivas, J. Viñolas, "Predicting the dynamic behaviour of hydrobushings", Shock and Vibration, Vol. 12 (2), 2005, pp. 91-107.

Publicaciones en Congresos Internacionales

Año 2016

  • A. Zuazua-Ros, C. Martin-Gomez, J.C. Ramos, T. Gomez-Acebo, "Bio-inspired heat dissipation system integrated in buildings: development and applications", 8th International Conference on Sustainability in Energy and Buildings (SEB 2016), Turín, Italia, 11-13 septiembre, 2016.
  • A. Zuazua-Ros, C. Martin-Gomez, J.C. Ramos, T. Gomez-Acebo, P. Mir, "Superficie disipadora de calor de alta resiliencia para edificios y sistemas", IV Congreso Nacional de I+D en Defensa y Seguridad, San Javier, Murcia, 16-18 noviembre, 2016.

Año 2015

  • G.S. Larraona, R. Bonilla, A. Rivas, R. Antón, J.C. Ramos, "Análisis y Optimización de un Caudalímetro de Placa de Orificio mediante CFD", Congress on Numerical Methods in Engineering (CMN 2015), Lisboa, Portugal, 2015.
  • R. Antón, J.C. Ramos, A. Rivas, G.S. Larraona, T. Gómez-Acebo, I. Otegui, "Prácticas computacionales y experimentales en la docencia de Ingeniería Térmica: cinco casos de estudio",  9º Congreso Nacional de Ingeniería Termodinámica, Cartagena, 3-5 junio, 2015.
  • I. Sesma-Pardo, A. Rivas, I. Lizarralde, J. Peral, I. Arruabarrena, J. Amores, E. Ayesa, P. Grau,  G.S. Larraona, "A Simple CFD Approach for the Simulation of the Flow in Dissolved Air Flotation Tanks", 9th IWA Symposium on Systems Analysis and Integrated Assessment, Gold Coast, Australia, 2015.
  • I. Lizarralde, I. Sesma-Pardo, J. Peral, I. Arruabarrena, J. Amores, P. Grau, A. Rivas, E. Ayesa, G.S. Larraona, "CFD modelling of liquid-gas transfer processes for dissolved air flotation technology", 9th IWA Symposium on Systems Analysis and Integrated Assessment, Gold Coast, Australia, 2015.

Año 2014

  • J. Aramburu, R. Antón, A. Rivas, J.C. Ramos, "Hepatic artery hemodynamics: Newtonian and Non-Newtonian fluid flow analysis", 12th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Amsterdam, Holanda, 13-15 octubre, 2014.

Año 2013

  • J. Gastelurrutia, M. Beiza, J.C. Ramos, R. Antón, G.S. Larraona, A. Rivas, I. de Miguel, J. Izagirre, L. del Río, "Towards the efficient refrigeration of transformer substations by means of Computational Fluid Dynamics", 22nd International Conference on Electricity Distribution, Estocolmo, Suecia, 10-13 junio, 2013.
  • G.S. Larraona, A. Rivas, J.C. Ramos, R. Antón, "Mejora de la Estabilidad en Simulaciones CFD en las que se emplean Modelos de Transporte de los Flujos Turbulentos de Calor", Congress on Numerical Methods in Engineering (CMN 2013), Bilbao, 2013.
  • N. Nieto, L. Díaz, J. Gastelurrutia, F. Blanco, J.C. Ramos, A. Rivas, "Modelado térmico de una batería de Ión-Litio de alta potencia", 8º Congreso Nacional de Ingeniería Termodinámica, Burgos, 19-21 junio, 2013.
  • J.C. Ramos, C. Martín-Gómez, R. Antón, A. Rivas, G.S. Larraona, A. García, "Modelado de un sistema de climatización basado en células termoeléctricas mediante TRNSYS", 8º Congreso Nacional de Ingeniería Termodinámica, Burgos, 19-21 junio, 2013.
  • M.A. Landeira, J.C. Ramos, E. Sánchez-Tapia, "Robot-assisted surgical platform for controlled bone drilling: experiments on temperature monitoring for assessment of thermal bone necrosis", Medicon 2013, XIII Mediterranean Conference on Medical and Biological Engineering and Computing, Sevilla, 25-28 septiembre, 2013.

Año 2012

  • N. Nieto, L. Díaz, J. Gastelurrutia, A. Mirone, I. Alava, F. Blanco, J.C. Ramos, A. Rivas, "Thermal modeling of high power lithium-ion cells as an approach for designing thermal management systems", 4th German Symposium “Advanced Battery Development for Automotive and Utility Applications and their Electric Power Grid Integration, Münster, Alemania, 6-7 marzo, 2012.

Año 2011

  • R. Antón,  C.Y. Chen, M.Y. Hung, E. Finol, K. Pekkan, "Experimental and Numerical Analysis of the Pressure Field in a Patient-Specific AAA Model with and without Intraluminal Thrombus", Euromech 529: Cardiovascular Fluid Mechanics, Cagliary, Italy, June 27-29, 2011.
  • M. Altimira, A. Rivas, J.C. Ramos, R. Antón, "Disintegration regime of industrial fan-spray atomizers through CFD simulations", 24th European Conference ILASS, September 5-7, Estoril, Portugal, 2011.
  • E. Martínez-Galván, R. Antón, J.C. Ramos, "Refrigeración de Componentes Electrónicos mediante Spray Cooling: Mediciones Térmicas y del Espesor de la Película", VII Congreso Nacional de Ingeniería Termodinámica, Bilbao, 15-17 junio, 2011.
  • G.S. Larraona, A. Rivas, J.C. Ramos, A. Antón, "Laboratorio de Mecánica de Fluidos Computacional para Estudiantes de Ingeniería Industrial", VII Congreso Nacional de Ingeniería Termodinámica, Bilbao, 15-17 junio, 2011.
  • M. Beiza, J.C. Ramos, A. Rivas, R. Antón, J. Gastelurrutia, G.S. Larraona, "Modelación de la Ventilación de Centros de Transformación", VII Congreso Nacional de Ingeniería Termodinámica, Bilbao, 15-17 junio, 2011.
  • J.C. Ramos, R. Antón, J. Gastelurrutia, E. Martínez-Galván, A. Rivas, G.S. Larraona, "Uso de Ejercicios Prácticos Competitivos como Método de Enseñanza de Transferencia de Calor", VII Congreso Nacional de Ingeniería Termodinámica, Bilbao, 15-17 junio, 2011.

Año 2010

  • Y. Masip, A. Rivas, A. Bengoechea, R. Antón, G.S. Larraona, J.C. Ramos, "Experimental study of the turbulent flow around a single wall-mounted prism obstacle placed in a crossflow and an impinging jet", Eight International on Advanced Fluid Mechanics, Algarve, Portugal, 2010. 
  • J. del Portillo, I. Adin, J. Mendizabal, R. Antón, J. Meléndez, G. Bistué, "Life Cycle of an Analogue Transmitter for a Safety-Critical System", DCIS 2010, XXV conference on design on circuits and integrated systems, November 17-19, Canary Islands, Spain, 2010.
  • R. Antón,  A. Bengoechea, A. Rivas, Y. Masip, J.C. Ramos, G.S Larraona, "Analysis of the performance reduction of axial fans in close proximity to EMC screens", International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems Workshop (EurosimE 2010), Burdeos, Francia, 26-28 abri, 2010. (Keynote Presentation).
  • A. Bengoechea, R. Antón,  Y. Masip, A. Rivas, J.C. Ramos, G.S. Larraona, "Hydraulic modelling of EMC screens and fans for telecommunication cabinets", Proceedings of IMAPS NORDIC, Gotemburgo, Suecia, 2010.
  • C. Martín-Gómez, M. Eguaras, N. Mambrilla, J. Torres, J.C Ramos, A. Rivas, “Prototype thermoelectric climate system for its use in residencial buildings”, XXXVII IAHS Worl Congress on Housing, 26-29 de octubre, Santander, 2010.  

Año 2009

  • E. Martínez, J.C. Ramos, R. Antón, B. Palm, R. Khodabandeh, "Heat transfer and film thickness measurements in a closed loop spray cooling system with R134a", THERMINIC 2009, pp. 180-185, Leuven, Bégica, 7-9 Octubre, 2009.
  • R. Antón, A. Astigarraga, C. de Castro, A. Iparraguirre, "Laboratorio Multimedia de aprendizaje y autoevaluación de la asignatura de termodinámica", VI Jornadas Nacionales de Ingeniería Termodinámica, Córdoba, 2009.
  • J. Gastelurrutia Roteta, J.C. Ramos González, A. Rivas Nieto, G. Sánchez Larraona, J. Izagirre Etxeberria, L. del Río Etayo, "Modelación Térmica de la Refrigeración por Convección Natural de Transformadores de Distribución de Tipo ONAN", VI Jornadas Nacionales de Ingeniería Termodinámica, Córdoba, 2009.
  • G. Sánchez, A. Rivas A, J.C. Ramos, “Assessment on the Influence of Turbulence Modelling and Near-Wall Resolution on the Simulation of a Single-Jet Water Meter”, CMFF'09 Conference on Modelling Fluid Flow, Budapest , Hungría, 10-12 Septiembre, 2009. [Proceedings Edited by J. Vad. ISBN 978-963-420-984-3. pp: 920-927 (Volumen 2).]
  • M. Beiza, J. Gastelurrutia, A. Rivas, J.C. Ramos, "Modelling and simulation of the natural ventilation of a transformer substation", Computational Methods for Thermal Problems. ISBN-13: 978-88-7431-459-1, pp. 264-268, Gianni Editore, Nápoles, Italia, 2009.

Año 2007

  • M. Altimira, A. Rivas, R. Antón, G. Sánchez, J.C. Ramos, "Fan-Spray Atomizers Analysis through Mathematical Modeling", ILASS 2007 conference, Mugla, Turquía, 2007.
  • R. Antón, J.C. Ramos, T. Gómez-Acebo, A. Rivas, "Termodinámica y transferencia de calor en un ciclo frigorífico mediante un laboratorio virtual", V Jornadas nacionales de Termodinámica, Vigo, 14-15 junio, 2007.

Año 2006

  • A. Rivas, M. Altimira, G. Sánchez, J.C. Ramos, "Analysis of liquid-gas flow at near fan-spray nozzle outlet", 13th Conference on Modelling Fluid Flow (CMFF'06), Budapest, Hungría, 2006.
  • J. Gastelurrutia, J.C. Ramos, A. Rivas, J. Izagirre, L. del Río, "Mathematical modelling and simulation of the oil natural convection inside distribution transformers", 13th Conference on Modelling Fluid Flow (CMFF'06), Budapest, Hungría, 2006.

Año 2005

  • J.C. Ramos, A. Rivas, J. M. Morcillo, "Numerical thermal modelling of the natural ventilation of a half-buried transformer substation using CFD techniques", 4th International Conference on Computational Heat and Mass Transfer (ICCHMT'05), París, Francia, 2005.
  • A. Pradera, A. Rivas, N. Gil-Negrete, J. Viñolas, C. Schram, "Numerical prediction of the aerodynamic noise radiated by a centrifugal fan", 12th International Congress on Sound and Vibration, Lisboa, Portugal, 2005.
  • A. Rivas, G. Sánchez, A. Estévez, J.C. Ramos, "Improving the design of fan spray atomizers through Computational Fluid Dynamics techniques", 20th Annual Meeting of the Institute of Liquid Atomization and Spray System (ILASS 2005), Orleans, Francia, 2005.
  • R. Antón, M. Castiella, H. Jonsson, B. Moshfegh, "Smoke and CFD visualization of the flow after an EMC screen in a sub-rack model" Proc THERMINIC 05, Belgirate, Italy, 27-30 September, 2005.

Año 2004

Año 2003

  • J.C. Ramos, A. Rivas, J. Biera, G. Sacramento, J.A. Sala, "Modelación del comportamiento térmico de un amortiguador bitubo de suspensión de automóvil", III Jornadas Nacionales de Ingeniería Termodinámica, Valencia, 5-6 junio, 2003.
  • G. Sánchez, A. Rivas, "Computational Fluid Dynamics approach to the design of single-jet water-meter", International Conference in Pumps, Electromechanical Devices and Systems (PEDS 2003), Valencia, 2003.
  • M. Coito, A. Rivas, G. Sánchez, "Numerical analysis of a radial hydrostatic bearing using Computational Fluid Dynamic techniques", Conference on Modelling Fluid Flow (CMFF 2003), Budapest, Hungría, 2003. 
  • J. C. Ramos, A. Rivas, J. Biera, G. Sacramento, J. A. Sala, "Modelación del comportamiento térmico de un amortiguador bitubo de suspensión de automóvil", 3ª Jornadas Nacionales de Ingeniería Termodinámica, Valencia, 2003.

Año 2002